- Contact Person : Mr. Wang Bentley
- Company Name : Hangzhou Fenglei Industrial Co., Ltd.
- Tel : 86-571-82452935
- Fax : 86-571-82452937
- Address : Zhejiang,Hangzhou City,Yuelian Industrial Park,Jinhua Town,Xiaoshan District
- Country/Region : China
- Zip : 311253
Silicone Gasket Maker
PRODUCT DESCRIPTION
Acetic RTV Silicone Adhesive Gasket Maker is a single component, room temperature vulcanizing (RTV) gasketing compound, designed for the sealing of mechanical assemblies. Upon curing from the exposure to moisture in the air, this non-sagging paste forms a tough, flexible, waterproof seal of silicone rubber, which resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Conforms to MIL-A-46106B, Type I. Acetic RTV Silicone Adhesive Sealant shall meet the requirements of the F.D.A. Code of Federal Regulations 21 CFR concerning food contact applications if used in accordance with its Section 177.2600: Rubber Articles Intended for Repeated Use. PRODUCT BENEFITS Easy application Applied to horizontal or vertical surfaces Superior adhesion and flexibility Waterproofs Insulates Unaffected by vibration Non-flammable
TYPICAL APPLICATIONS Acetic Silicone Gasket Maker is an excellent all-purpose adhesive/sealant for the following materials: Metal Glass
Wood Plastic Silicone resin Vulcanized silicone rubber Ceramics Natural and synthetic fibers
Painted surfaces
DIRECTIONS FOR USE For Assembly 1. Remove all previous material from mating surfaces. JIYUAN Gasket Remover is recommended for most materials, not for plastics or painted surfaces. 2. For best results, clean and dry all surfaces with a residue-free solvent, such as JIYUAN Brake and Parts Cleaner. 3. Cut nozzle to desired bead size, 1/16 to 1/4 in diameter. An 1/8 bead is usually sufficient for most applications. 4. Remove cap, puncture tube or cartridge seal and attach extension nozzle. 5. Apply a continuous and even bead of silicone to one surface, as shown below: 6. Assemble parts immediately while silicone is still wet. Secure or tighten as required, avoiding excessive squeeze-out. 7. Re-torque will not be necessary after the product has cured.
Silicone Gasket Maker