- Contact Person : Mr. Wang Bentley
- Company Name : Hangzhou Fenglei Industrial Co., Ltd.
- Tel : 86-571-82452935
- Fax : 86-571-82452937
- Address : Zhejiang,Hangzhou City,Yuelian Industrial Park,Jinhua Town,Xiaoshan District
- Country/Region : China
- Zip : 311253
High Temperature RTV Gasket Maker
DESCRIPTION OF PRODUCT:
High Temperature RTV Gasket Maker
-One part component with special design to meet today's technology changes.
-It forms any size of shape gasket which is resistant to both high temperature and high pressure.
- Resists cracking, shrinking and migrating caused by thermal cycling.
-Withstands temperature from -80F up to 650F.
CHARACTERISTIC:
-High Temperature gasketing material designed primarily for use on aluminum, iron and steel flanged mating surfaces. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable.
-Fills gaps up to .015" and cures to a solvent resistant seal that will not tear or decay during service.
-Suggested applications: Water pumps, themostat housings, transmission pans and case covers, transaxle casings, o-ring replacement.
SURFACE PREPARATION:
-The silicone sealant should be applied at a thickness not to exceed 6mm (1/4 in) from an exposed edge. -The recommended minimum joint dimension is 1/4" x 1/4" and the maximum joint dimension is 1" x 3/8"..-Ensure all surfaces that will be in contact with the sealant must be clean, dry, free of dust , dirt, rust, oil and other contaminants.-Nonporous substrates should be clean with solvent and wipe dry immediately with cloth before the solvent evaporates from the surface. Porous surfaces should be roughen with a stiff-bristled brush, rubbed down or sandblasted.-Cut off tip nozzle and cartridge. Screw n nozzle to cartridge.-Fit into caulking gun, apply on surface in steady flow.-If required, smooth and shape sealant with spatula dipped in mild detergent.-To remove excess uncured sealant with a mineral turpentine soaked cloth. Fully cured excess sealant can be removed by trimming with a sharp knife.-Content fully cures in 48 hours.
SAFETY PRECAUTION:
Ensure good ventilation if used indoors. Contact of unvulcanised silicone sealant with eyes and mucous membranes must be avoided as this will cause irritation.
High Temperature RTV Gasket Maker
